THE SHOP FLOOR SYSTEM

The whole shift under control.

Production logging, machine status and notices with confirmed reading — from the cell terminal to the leadership dashboard.

6 modules in one dashboard 10 screens with a guided tour 4 PIN digits at the terminal 100% of changes in the audit log 0 tracking cookies 15 s for the dashboard to refresh
THE PROBLEM

The shop floor doesn't fit in a spreadsheet.

  1. 01

    Production data arrives too late.

    The shift's output becomes a number the next day, when nobody remembers why the machine stopped.

    D+1 output becomes a number the next day
  2. 02

    Nobody sees the stopped machine.

    Without andon, a stop is only noticed when someone walks past the workstation.

    no andon a stop shows up only when someone walks by
  3. 03

    Notices don't reach operators.

    Safety messages live on the notice board or in a chat group, with no reading confirmation.

    0 reading confirmations
  4. 04

    The roster breaks mid-shift.

    Absences, sick notes and vacations become coverage gaps with good machines idle.

    mid-shift is when the gap appears
THE PRODUCT

One screen for each role. All on the same shift.

01 · Dashboard

The whole plant at a glance.

Shift availability, today's output, open help calls and the longest stop with its clock running.

02 · Andon map

Every machine, where it really is.

The shop floor layout with each machine in its status color — running, in setup or asking for help.

03 · Terminal

Operators log in seconds.

Badge and PIN, the order in production and the shift log, right at the cell.

04 · Notices

Notices that must be read.

The notice opens on the terminal and locks logging until the operator confirms reading it.

Also Coverage roster by shift and unstaffed workstations Indicators OEE, loss Pareto and machine by machine
HOW IT WORKS

A whole shift, from terminal to leadership.

The real path of information in HubNexus: every log, status and help call goes through the same flow — and is recorded in the audit log.

notice published · locks the terminal until “I have read it” Terminal badge and PIN Production log parts and closing Machine status running · setup · stopped HubNexus real time Dashboard leadership Andon map shop floor Help call with a deadline Indicators OEE and Pareto Escalation up to leadership Audit log author, before/after
  1. Badge and PIN on the cell tablet. The terminal opens on their own workstation.

  2. Shift parts, closing and machine status: running, in setup or stopped with a reason.

  3. Each record goes straight to HubNexus — no spreadsheet, no waiting for the end of the shift.

  4. Leadership sees the whole plant; the map paints every machine in its status color.

  5. If nobody answers, the call moves up on its own: neighbor cell, technician and leadership, within the time the plant sets.

  6. Leadership publishes a notice; it opens on the terminal and locks logging until the operator confirms reading it.

  7. OEE, loss Pareto and machine by machine — and every change recorded with author, origin, before and after.

ROLLOUT

Three steps. From setup to shift.

Nothing to install on the machines: register, turn on the terminals and publish.

I SETUP

We configure your plant

Cells, machines, shifts, people and the map, in a 9-step walkthrough.

II TERMINALS

Terminals at the cell

A tablet or kiosk in each cell, with sign-in by badge and PIN.

III PUBLISHING

Dashboard live on the shift

Once published, it is live for leadership and technicians.

SCOPE

Sized by your plant.

Every tier has all six modules and unlimited people. Only the number of machines changes — and pricing is on request.

Starter

01
One cell or a small plant
up to 25 machines
  • All 6 modules
  • Unlimited people
  • Terminal sign-in with badge and PIN
  • Audit log and CSV export
  • Pricing on request
Request a demo

Enterprise

03
Large operations
300+ machines
  • All 6 modules
  • Unlimited people
  • Terminal sign-in with badge and PIN
  • Audit log and CSV export
  • Pricing on request
Request a demo

Not sure which tier fits? We settle the scope in the demo.

Book a demo
QUESTIONS

What people always ask.

Didn’t find yours? We answer it in the demo, with the dashboard on screen.

Does it need to integrate with the machine controller?

No. Logging is done by the operator at the cell terminal, with badge number and PIN. Today HubNexus does not read data directly from the CNC or PLC; if your plant needs that, let’s talk about it in the demo.

What if the internet goes down on the shop floor?

The terminal needs a connection to save. So the shift isn’t lost, production closing stays open for a configurable window after the shift ends, and the operator logs as soon as the network is back.

What does the rollout look like?

The rollout is the Ecosystem setup: a 9-step walkthrough covering cells, machines, shifts, people and the plant map. Once everything is checked, you publish and the terminals are ready to use.

Do operators need training?

Every screen has a “How to use”: a guided tour that highlights the actual button on screen. The operator terminal has few actions: machine status, logging, help request and reading notices.

Is the data ours?

Yes. The audit log keeps the author, origin and the before and after of every change, and can be exported to CSV at any time.

Does it work on a tablet and on the leadership’s computer?

Yes. The cell terminal runs in the browser of a touchscreen tablet or kiosk, and the management dashboard in any desktop browser.

DEMO

Shall we look at your shop floor?

A conversation with the dashboard running: we walk through the modules and map your machines, cells and shifts with you.

NO COMMITMENT

A rough number is enough.

We only use this data to talk to you about the demo. Privacy policy

Book a demo

A conversation with the dashboard running on the reality of your plant. We reply by email to set a time.

A rough number is enough.

We only use this data to talk to you about the demo. Privacy policy